Cautions

When adhered to your skin Wipe immediately and wash properly with soap and hot water. If itchy and inflamed, see a doctor right away.	When got in your eyes Wash immediately with plenty of water spilling and see a doctor immediatel	When you inhale If any healthy problems occured such as itchy due to the inhalation of the vapor, which temperature has increased as a result of the mixture of the glue and primer, see a doctor immediately.	When you drink Do not vomit intentionally and see a doctor as soon as possible.

When spilled Wipe it off with paper or cloth. If the amount is large, collect the glue in a container with cap. ( Notice: cotton cloth shall be avoided.)	If a fire brake out Take flammables away from the flame, and use a fire extinguisher (powder, carbon dioxide (ABC type) with down the wind	During the work In the workplace occuring mixture, injection, coating, and adhesion activities, please install exhaust system of ventilation.	Proper dres Please wear impervious gloves, long sleeves, or wand etc, and handle it by using hands.

Caution after use

- Workbench, etc., soiled, please clean the place.
- Lid of the container, nozzle, attached to organizations with one subject, hardener, please wipe out. (And hardener when you close the lid of the hot water may not change Can.)
- After work, wash your hands, please input haenggum enough.
- Keep container tightly closed and store it in a dry cool dark place.
- Keep out of the reach of children, and please be careful to avoid mischief.

When disposing of the note

Disposal of waste and cleaning in accordance with government regulations for the Act based on incineration, or licensed disposal contractor should be charged with. Similarly, container or rag should be also.

Measures to prevent bruising of the skin

Epoxy adhesives are skin, eye, mucous membrane irritation of the neck is applied to the skin may cause itching or heolge. Heolmyeon many times, sensitized by the action Please note doeni collapse skin easily.
- Ventilation before work, glasses, masks, gloves (PE, rubber) and ready.
- This protects the exposed part of the skin cream should paint.
- Work environment (workbench, container) clean and, please wipe it off immediately if soiling.
- After work, the wash with soap and water.
※ For the diagnosis of the symptoms please consult your doctor.

Bond terms

- Working time : It is the time that a mixture is able to coat after two liquid stirring a mixture.
  (Usually the initial viscosity will be double times or nearly 60% of peak heating time.)
- Setting time : It is the time that bond strength and physical properties(tensile, compression, hardness, etc.) are almost stable.
- Tensile strength : It is result of maximum load divided by the area, when the applied adhesive things then test for tensile strength.
- Thixotropy : It is gel in the stationary status. Only it turns to liquidity as application of agitation or vibration. After leaving it, it turn back to the gel status.